HC1018 concrete 3D printing robot is an advanced intelligent construction equipment, 3D printing beams, columns, plates, walls and other building components; It can also be used for fine printing of architectural components, garden landscape, and architectural landscape components. The equipment integrates information technology, precision machinery, material science and other multidisciplinary technology, which is composed of printing host, conveying system, printing nozzle, slide rail, software, material barrel and nozzle, etc., with reasonable design, complete performance, convenient and practical.
Technical characteristics
●Support printing pause, specified position, from the specified height printing and other operations;
●Equipped with independent mixing and conveying system, easy maintenance;
●The manipulator adopts vertical multi-joint design, with independent 4 degrees of freedom;
●The independent model slicing software has fast response speed, simple interface, convenient operation and off-line operation.
●The fully enclosed mobile track has the advantages of stable structure, stable operation, small friction coefficient, dustproof and maintenance free;
●The system control software has fast response speed, simple interface and convenient operation.
●Independent research and development of 3D model slicing and printing path planning software, can support a variety of area filling schemes (concentric circle, word loop, line, grid), etc. Support DXF document polygon, line planning print path; Support multi-model, hierarchical grouping and slicing, suitable for different printing scene requirements; Support printing path optimization (track thinning, encryption, uniform distribution), printing the finished product effect is good.
Application field
●3D printing of beams, columns, plates, walls and other building components;
●3D printing of special-shaped templates, architectural models, landscape and so on.
Technical parameters
To large print dimensions
(length × width × height) | LWH：9000mm/2000mm/1500mm |
Nozzle diameter | 30mm、40mm、50mm |
Arm radius | 3150mm |
Slide rail length | 6000mm |
To large load capacity | 180kg |
Freedom of motion | 4 |
Application case
HC1018 3D printing robot (Ⅲ) concrete application case
